1 / 6
Breyer Horse Stablemates Barn - Roof Holder — zdjęcie 1
1 / 6

Breyer Horse Stablemates Barn - Roof Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holds open the roof for the Breyer Horse Stablemates Deluxe Stable Playset.

Ocena
0 / 5
Polubienia
2
Pobrania
14
Wydruki
0
Wyświetlenia
291
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Holds open the roof for the Breyer Horse Stablemates Deluxe Stable Playset. Keeps both roof flaps open at once.

Interior diameter 18 mm, roof slot interior width 6 mm, thickness 1.5 mm, extruded 20 cm. 

The roof panel is about 5-5.5 mm thick, for any remake, I recommend changing the roof slot interior width to 5.5 mm instead of 6 mm to keep the fit tighter with the roof held more vertically.

Printed in Prusament PETG Prusa Orange.

Printing Instructions

Print on flat side with opening facing upwards, no supports needed.

Tagi