Hitway H5 - Bag Holder Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bag holder adapter for the Hitway H5 E-Scooter and for additional bags to be attached to…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 362
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
Basic information
This is a bag holder adapter for the Hitway H5 E-Scooter and for additional bags to be attached to the front of the handlebar.
The Hitway H5 has a round handlebar in the upper area, but a kind of hexagonal handlebar in the lower area. In the lower area, the original connection block of the bag only fits with difficulty, as it is usually designed for round or rectangular handlebars.
Model information
The adapter is specially designed for the 2 liter bag from CHICLEW (https://www.amazon.de/CHICLEW-Rollertasche-Lenkertasche-Vordertasche-Elektroroller/dp/B08PV92K96?th=1). In principle, however, it should work for various bags that have a flat connection block.
Printing and assembly instructions
Simply print it (i recomment using the original print profile, otherwise see my print settings), place it between the original connection block and the handlebar and everything should fit without wobbling. Make sure to insert the original fastening straps into the holes provided in the original connection block (see pictures).
If you have questions, don't be shy. :)
Print Settings
Printer Brand:
Bambulabs
Printer:
Bambu P1S
Rafts:
Yes
Supports:
Yes
Resolution:
0.16
Infill:
15%
Filament: Filamentworld / Bambu Labs PLA Black
Notes:
Additional settings I used:
- Walls: 6
- Infill Pattern: 3D-Honeycomb
- Tree support
- Brim: 5 mm