1 / 1
S00nish Classic Charging Plate for Rivian R1T — zdjęcie 1

S00nish Classic Charging Plate for Rivian R1T

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The one that started it all for S00nish - refined and updated a bit!

Ocena
0 / 5
Polubienia
12
Pobrania
82
Wydruki
0
Wyświetlenia
724
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

Best printed in ASA to prevent warping in the heat. PETG works fine too. The .gcode file is optimized for a Prusa MK4.

Works with Apple Magsafe Charging Pucks, JSAUX MagSafe pucks, and Mophie Charging Pucks - those are the three we've tested to work for sure. It's a VERY snug fit by design. I found that inserting the pucks was best done by getting them as far in as possible with the non-corded end sitting up a bit, then taking a folded up towel and putting it on top of the pucks, then a swift tap with a hammer would pop them right in without damaging anything.

Tagi