LM8UU Bearing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Specialized LM8UU Bearing for printing with all nozzle diameters
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 588
- Wydruki
- 5
- Wyświetlenia
- 1924
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Other LM8UU bearings are modeled without much thought put into how the part will be printed.
I modeled each of these to be printed with a their corresponding nozzle size using no infill, no top and bottom layers, and a wall line count of 1.
I would suggest using a persist z-seam for consistancy.
Because of the precise dimensions, this piece will print very quickly. I print the .04mm nozzle size in 13 minutes at .24mm layer height and 25mm/s (only outer wall speed matters here).
If you have a .2mm or .3mm nozzle, use the file meant for the .6mm nozzle. The wall thickness for those would be too delicate.