1 / 6
5 TOWERS Inlay with card divider (Inlay mit Kartentrenner)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
5 TOWERS Inlay with card divider (Inlay mit Kartentrenner)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 331
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (11)Powiązane
This inlay has been made for the well known 5 TOWERS card game by Deep Print / Pegasus.
If you play with less than 4 players you have to follow the rules and sort out about 30 cards. As we often play with 3 players max. we designed this little inlay which offers TWO compartments for cards:
1 for the standard cards (2-3 players) and
1 for the cards you only need for 4+ players
It even leaves enough space for the game manual on top. Have a look at the pictures…
Have fun!
Material: PLA
Layerheight: 0.3mm or better
Infill: 10%