1 / 6
5 TOWERS Inlay with card divider (Inlay mit Kartentrenner)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
5 TOWERS Inlay with card divider (Inlay mit Kartentrenner)
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 26
- Makes
- 0
- Views
- 331
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This inlay has been made for the well known 5 TOWERS card game by Deep Print / Pegasus.
If you play with less than 4 players you have to follow the rules and sort out about 30 cards. As we often play with 3 players max. we designed this little inlay which offers TWO compartments for cards:
1 for the standard cards (2-3 players) and
1 for the cards you only need for 4+ players
It even leaves enough space for the game manual on top. Have a look at the pictures…
Have fun!
Material: PLA
Layerheight: 0.3mm or better
Infill: 10%