Gowin r86s DIN rail mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To mount a Gowin GW-R86S computer (thick version) on a DIN rail
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 453
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Gowin GW-R86S computers are well suited to be software routers. I have mine in a «poor man's network rack», a wall with a DIN rail*.
This part suits thicker r86s models with 10GE, namely [GW-R86S-G](https://www.gowinfanless.com/products/network-device/r86s-firewall-router/gw-r86s-g-series) and [GW-R86S-U](https://www.gowinfanless.com/products/network-device/r86s-firewall-router/gw-r86s-u-series) Series
It works well when printed in PETG. You'll also need 2×M4 screws and preferably 2×M4 washers
When mounting the machine, look out to keep the air inlet and the power button free!
*DIN rail means: top hat rail IEC/EN 60715 – 35 × 7.5.