Gowin r86s DIN rail mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To mount a Gowin GW-R86S computer (thick version) on a DIN rail
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 36
- Makes
- 0
- Views
- 453
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Gowin GW-R86S computers are well suited to be software routers. I have mine in a «poor man's network rack», a wall with a DIN rail*.
This part suits thicker r86s models with 10GE, namely [GW-R86S-G](https://www.gowinfanless.com/products/network-device/r86s-firewall-router/gw-r86s-g-series) and [GW-R86S-U](https://www.gowinfanless.com/products/network-device/r86s-firewall-router/gw-r86s-u-series) Series
It works well when printed in PETG. You'll also need 2×M4 screws and preferably 2×M4 washers
When mounting the machine, look out to keep the air inlet and the power button free!
*DIN rail means: top hat rail IEC/EN 60715 – 35 × 7.5.