Craftsman Drill Press Handwheel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Convert a spoked down-feed to a hand-wheel down-feed.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 226
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
This print is similar to my MiniMill DownFeed HandWheel Mod, but a complete redesign was required to accommodate the spokes on a Craftsman Drill Press.
This handwheel was designed to fit a Craftsman bench drill press 10in model; model number 137.219001. It will probably fit other Craftman models - I have included a measurements drawing so you can check the spokes on your drill press (see included PDF).
In addition to the 3D printed parts, this also requires :
- M3 X 8mm SHCS, qty 6
- M3 X 20mm SHCS, qty 9
- M3 hex nuts, qty 15
Assembly
Print Instructions
Print in PETG using the 3mf file provided; otherwise :
- 0.3mm layer height
- 3 perimeters
- 15% grid infill
- supports on build plate only
- variable layer height (adaptive) on all sections
CAD
The OnShape 3D CAD files for this are here :