1 / 4
Craftsman Drill Press Handwheel
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Convert a spoked down-feed to a hand-wheel down-feed.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 24
- Makes
- 0
- Views
- 226
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
This print is similar to my MiniMill DownFeed HandWheel Mod, but a complete redesign was required to accommodate the spokes on a Craftsman Drill Press.
This handwheel was designed to fit a Craftsman bench drill press 10in model; model number 137.219001. It will probably fit other Craftman models - I have included a measurements drawing so you can check the spokes on your drill press (see included PDF).
In addition to the 3D printed parts, this also requires :
- M3 X 8mm SHCS, qty 6
- M3 X 20mm SHCS, qty 9
- M3 hex nuts, qty 15
Assembly
Print Instructions
Print in PETG using the 3mf file provided; otherwise :
- 0.3mm layer height
- 3 perimeters
- 15% grid infill
- supports on build plate only
- variable layer height (adaptive) on all sections
CAD
The OnShape 3D CAD files for this are here :