Bambu Lab MMS 0.5 (Manual Material System for 2 spools)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This spool holder, inspired by the MMS is the easiest way to change filaments for Bambu Printers!
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 1013
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a stripped down, easier to make MMS for 2 1kg filament spools.
I was inspired to make this by the orignial MMS (https://www.printables.com/model/676422-bambu-labs-mms-manual-material-system), as I wanted to achieve the same effect but with using significantly less non-3d printable parts.
The original uses 16 bearings, 2 metal rods, threaded inserts and a lot of screws - however the MMS 0.5 uses 1 M3 8mm screw and a length of PTFE tubing (something I had lying around). Also you may want to add some anti-slip feet as it may move around during aggressive printing.
The only thing you need to do in the slicer is to support block the bottom stand, as the 2 filament guides have to be hollow. A handy guide to this in Bambu Slicer/Orca Slicer is here -
It is possible to link 2 of these together by using a Y - splitter (link here - https://www.printables.com/model/372040-ptfe-tube-y-splitter-with-strong-magnets).
I also plan on making a 4 spool version, and will post that soon.
In the meantime happy printing and easy filament swapping!