Bambu Lab MMS 0.5 (Manual Material System for 2 spools)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This spool holder, inspired by the MMS is the easiest way to change filaments for Bambu Printers!
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 69
- Makes
- 0
- Views
- 1,011
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
This is a stripped down, easier to make MMS for 2 1kg filament spools.
I was inspired to make this by the orignial MMS (https://www.printables.com/model/676422-bambu-labs-mms-manual-material-system), as I wanted to achieve the same effect but with using significantly less non-3d printable parts.
The original uses 16 bearings, 2 metal rods, threaded inserts and a lot of screws - however the MMS 0.5 uses 1 M3 8mm screw and a length of PTFE tubing (something I had lying around). Also you may want to add some anti-slip feet as it may move around during aggressive printing.
The only thing you need to do in the slicer is to support block the bottom stand, as the 2 filament guides have to be hollow. A handy guide to this in Bambu Slicer/Orca Slicer is here -
It is possible to link 2 of these together by using a Y - splitter (link here - https://www.printables.com/model/372040-ptfe-tube-y-splitter-with-strong-magnets).
I also plan on making a 4 spool version, and will post that soon.
In the meantime happy printing and easy filament swapping!