Allen Key Holder for Prusa Mini (and maybe others)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keeps the indispensable Allen Key used to adjust your Prusa from getting lost. Pess-fits into the front base panel.
- Ocena
- 4,667 / 5
- Polubienia
- 6
- Pobrania
- 41
- Wydruki
- 3
- Wyświetlenia
- 534
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Keeps the indispensable Allen Key used to adjust your Prusa from getting lost.
I designed this to press-fit perfectly into the hexagonal holes at the front or back of the Prusa Mini's base. May work on other Prusa printers with the same pattern.
Original Blender model provided, so you can use the base hex pattern to stick other stuff to your printer like Lego.
Printing:
- Recommend a 10mm Ring - this thing is TINY so needs wide base for good adhesion
- Recommend raising bed temp to 70C for PLA to get it to stick better.
- Used a 0.05mm ultra quality setting for Prusament PLA. It's a precision part, go as detailed as you need.
Print Settings
Printer Brand:
Prusa
Printer:
MINI+
**Rafts:** No
Supports:
No
**Resolution:** 0.05
Infill:
15
**Filament:** Prusament PLA
Category: 3D Printer Accessories