Improved Prosumer's Choice charge station slat with optional MagSafe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric design for an improved slat for Prosumer's Choice charge stations.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 146
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
I have multiple Prosumer's Choice bamboo charge station boxes. The slots on each of them are a slightly different length and width. I found existing designs that would require edits to fit the slots on my boxes. Instead, I decided to create a model from scratch using Fusion360. I had the idea to integrate some cheap magsafe-compatible charging cables I picked up.
I decided to fillet the edges of the tongue to match the slots. This makes for a tighter fit than the original. I applied a similar fillet to the slat itself. You could dial that out using the parameters if you don't want it.
I only needed two of these, but liked the tidiness of feeding cables through the slots, so I made the others with a HoleDiameter of 10mm so I could just feed a USB cable through the cable channel.
You can find the Fusion360 model here:
Default parts and parameters
The default parameters used in the attached files refer to these models:
Bamboo Charging Station Rack
https://www.amazon.com/dp/B07F1KTM7V
YLLZI Magnetic Wireless Charger
https://www.amazon.com/dp/B0BBTPQY1V
The phone is a Google Pixel 8 Pro with a MagSafe-compatible case. If you have a significantly narrower phone, you may need to reduce HoleY a little.
Slicer settings
I used Orca slicer. The top/bottom shells used Archimedian arcs to give the concentric circle effect. I used 50% rectilinear infill.