Improved Prosumer's Choice charge station slat with optional MagSafe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric design for an improved slat for Prosumer's Choice charge stations.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 146
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Share Alike
I have multiple Prosumer's Choice bamboo charge station boxes. The slots on each of them are a slightly different length and width. I found existing designs that would require edits to fit the slots on my boxes. Instead, I decided to create a model from scratch using Fusion360. I had the idea to integrate some cheap magsafe-compatible charging cables I picked up.
I decided to fillet the edges of the tongue to match the slots. This makes for a tighter fit than the original. I applied a similar fillet to the slat itself. You could dial that out using the parameters if you don't want it.
I only needed two of these, but liked the tidiness of feeding cables through the slots, so I made the others with a HoleDiameter of 10mm so I could just feed a USB cable through the cable channel.
You can find the Fusion360 model here:
Default parts and parameters
The default parameters used in the attached files refer to these models:
Bamboo Charging Station Rack
https://www.amazon.com/dp/B07F1KTM7V
YLLZI Magnetic Wireless Charger
https://www.amazon.com/dp/B0BBTPQY1V
The phone is a Google Pixel 8 Pro with a MagSafe-compatible case. If you have a significantly narrower phone, you may need to reduce HoleY a little.
Slicer settings
I used Orca slicer. The top/bottom shells used Archimedian arcs to give the concentric circle effect. I used 50% rectilinear infill.