BabyApe 3 Pro Base for Runcam Thumb Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This camera mount works with all Runcam Thumb cameras and the original camera holder. The 2 screws in the back are the…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 56
- Wydruki
- 1
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
This camera mount works with all Runcam Thumb cameras and the original camera holder. The 2 screws in the back are the original screws, whereas the one in the front is a spare M2 with a self locking nut. Best to remove the top plate of the drone before mounting this screw to have good access.
With this mount the camera is a couple mm higher than the original mount, which allows the battery to be moved slightly further to the front and allows a steeper camera angle.
Printing in TPU will be to soft and unstable. I would recommend PETG, PLA or ASA.
Print Settings
Printer Brand:
Sovol 3D
Printer:
Sovol SV05
Rafts:
No
Supports:
No
Resolution:
0,2
Infill:
100%
Filament: eSun PETG black
Category: R/C Vehicles