BabyApe 3 Pro Base for Runcam Thumb Pro
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This camera mount works with all Runcam Thumb cameras and the original camera holder. The 2 screws in the back are the…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 56
- Makes
- 1
- Views
- 236
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
This camera mount works with all Runcam Thumb cameras and the original camera holder. The 2 screws in the back are the original screws, whereas the one in the front is a spare M2 with a self locking nut. Best to remove the top plate of the drone before mounting this screw to have good access.
With this mount the camera is a couple mm higher than the original mount, which allows the battery to be moved slightly further to the front and allows a steeper camera angle.
Printing in TPU will be to soft and unstable. I would recommend PETG, PLA or ASA.
Print Settings
Printer Brand:
Sovol 3D
Printer:
Sovol SV05
Rafts:
No
Supports:
No
Resolution:
0,2
Infill:
100%
Filament: eSun PETG black
Category: R/C Vehicles