1 / 1
Wheels with axle for floor nozzle of vacuum cleaner - suitable for e.g. Siemens — zdjęcie 1

Wheels with axle for floor nozzle of vacuum cleaner - suitable for e.g. Siemens

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The original part was broken, so I have designed this wheel to build up an axle using a threaded bar M3 and a hose 5x1.

Ocena
0 / 5
Polubienia
2
Pobrania
36
Wydruki
0
Wyświetlenia
357
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Part is printed with PETG and need partial support.

Part list:

  • wheel | quantity: 2
  • hose 5x1 | length: 90mm
  • threaded bar M3 | length: 108mm
  • hexagon nuts M3 | quantity: 4
  • washer for M3 e.g. ISO 7093 | quantity: 2
Print instruction:
  • supports: organic support recommended
  • layer height: 0,2mm or 0,3mm
  • nozzle diameter: 0,4mm or 0,6mm
  • brim: NO
  • enclosure: NO
Assembly instruction:
  1. deburr parts if needed
  2. insert threaded bar to hose
  3. add wheels and check if wheels rotate with low friction; if friction is to high deburr bore or enlarge bore of the wheel
  4. add washer and hexagon nuts M3 (2x) to fix first wheel
  5. counter hexagon nuts
  6. assemble part to floor nozzle
  7. assemble second wheel, add washer and hexagon nuts M3 (2x)
  8. counter hexagon nuts

 

Tagi