1 / 1
Wheels with axle for floor nozzle of vacuum cleaner - suitable for e.g. Siemens
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The original part was broken, so I have designed this wheel to build up an axle using a threaded bar M3 and a hose 5x1.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 36
- Makes
- 0
- Views
- 357
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Part is printed with PETG and need partial support.
Part list:
- wheel | quantity: 2
- hose 5x1 | length: 90mm
- threaded bar M3 | length: 108mm
- hexagon nuts M3 | quantity: 4
- washer for M3 e.g. ISO 7093 | quantity: 2
Print instruction:
- supports: organic support recommended
- layer height: 0,2mm or 0,3mm
- nozzle diameter: 0,4mm or 0,6mm
- brim: NO
- enclosure: NO
Assembly instruction:
- deburr parts if needed
- insert threaded bar to hose
- add wheels and check if wheels rotate with low friction; if friction is to high deburr bore or enlarge bore of the wheel
- add washer and hexagon nuts M3 (2x) to fix first wheel
- counter hexagon nuts
- assemble part to floor nozzle
- assemble second wheel, add washer and hexagon nuts M3 (2x)
- counter hexagon nuts