Orbital (V1.5 NOT 2.0)/LGX Lite/LGX Pro adapter for Creality K1/K1 Max
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed as spare. This is an adapter to put an alternative extruder inside the space where the original is placed
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 121
- Wydruki
- 0
- Wyświetlenia
- 1940
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
MARCH 23TH 2024 UPDATED VERSION
- Orbiter 1.5 fixed holes
- Alternative version to use with the Bondtech LGX Lite/Bondtech LGX Lite Pro
YOU MUST HAD ROOTED THE K1/K1Max/K1C
Rotation distance for Orbiter 1.5: 4.8
Rotation distance for Bondtech LGX Lite: 5.8
Rotation distance for Bondtech LGX Lite Pro (not yet tested): Available on April
JAN 6TH 2024 (MAIN INFORMATION):
Designed as spare.
I don't own a K1 Max but I think that it will also works.
This is an adapter to put the orbital extruder 1.5 inside the space where the original is placed.
You don't need in the future to remove the extruder for maintenance. Only remove the three screws as you do normally with the Creality extruder.
Needs:
2 x M3x10 screws for the orbital extruder and 4x M3x10 for the Bondtech extruder
The three originals screws that holds the original extruder on the sides.
5 x M3x 5 mm inserts: LINK ALIEXPRESS
1 piece of capricorn bowden tube almost 50-52 mm
Orbital Extruder (choose one but I bought the 1.5. The 2.0 is just an update and quite expensive):
ATTENTION!!! BUY WITH THE MOTOR. The cogwheel from the extruder motor of Creality doesn't fit. I made a tremendous mistake buying without the motor.
Requires ABS/ASA
You need to enlarge the extruder motor cables in order to connect correctly to the extruder.
FIXED BUG: One hole of each side was 1 mm up from the hole of the main carriage.
UPDATE: Nathan's version doesn't fit with this orbital extruder. The right hole from the extruder doesn't have any hole on Nathan's version. This is a new version more lighter and more easy to install.
If you have any problem, please consider to tell me in the comments below.
JAN 6 2024:
Step file added.
NOT FOR 2.0.
EXTRA TO USE WITH THE BONDTECH LGX LITE/LGX LITE PRO
Tip: If you have problems to fits the holes of the adapter to main carriage, consider to open a little the holes from the carriage and it should be fine. Sometimes, when you put the heat inserts, they move a little and maybe you can't fit it.