Thermometer hygrometer stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A desk stand for a commonly available, cheap temperature/hygrometer sensor.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 113
- Wydruki
- 5
- Wyświetlenia
- 369
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have made this simple stand for a commonly available, cheap hygro- and temperature-sensor. The stand is angled under 60 degrees and currently serves me well on my desk to show me the room temperature and humidity of my office.
Update 2024-02-18: Stand v2 added, which should have a better fit and has cutouts for the lips of the hygrometer.
By the way, the texture on the front of my print is the result of using a textured PEI plate.
What you additionally need:
- Sensor, which can be purchased here, or anywhere similar (I think aliexpress carries them as well).
I used the following settings to print in 1.75 PLA with 0.4 nozzle:
| layer height | 0.2mm |
| walls | 2 |
| top shell layers | 2 |
| bottom shell layers | 2 |
| infill | 15% grid |
| raft or brim | no |
| support | not if oriented right way up (hole should be on the bed) |
Leave a like, make or remix as you like!