Thermometer hygrometer stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A desk stand for a commonly available, cheap temperature/hygrometer sensor.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 114
- Makes
- 5
- Views
- 371
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I have made this simple stand for a commonly available, cheap hygro- and temperature-sensor. The stand is angled under 60 degrees and currently serves me well on my desk to show me the room temperature and humidity of my office.
Update 2024-02-18: Stand v2 added, which should have a better fit and has cutouts for the lips of the hygrometer.
By the way, the texture on the front of my print is the result of using a textured PEI plate.
What you additionally need:
- Sensor, which can be purchased here, or anywhere similar (I think aliexpress carries them as well).
I used the following settings to print in 1.75 PLA with 0.4 nozzle:
| layer height | 0.2mm |
| walls | 2 |
| top shell layers | 2 |
| bottom shell layers | 2 |
| infill | 15% grid |
| raft or brim | no |
| support | not if oriented right way up (hole should be on the bed) |
Leave a like, make or remix as you like!