1 / 2
Honeycomb Wall Holder for WERA Torx HF set — zdjęcie 1
1 / 2

Honeycomb Wall Holder for WERA Torx HF set

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Honeycomb Storage Wall (HSW) holder for the WERA Torx HF L-key set

Ocena
5 / 5
Polubienia
23
Pobrania
136
Wydruki
1
Wyświetlenia
587
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Description

This is a holder keeping your WERA Torx HF L-key set (967/9 TX XL Multicolour HF) nicely on your Honeycomb Storage Wall (HSW) for easy retrieval. There were a lot of holders already, which keep the L-keys separately on the wall without using the holder provided by Wera. However, I wanted to keep the L-keys in the Wera holder so that I can take the whole set with me when needed. So, here you go.

What is needed?

  • print model either from the provided step or stl
  • print an empty insert from the original HSW collection

How to print

No need for supports or brim.

I suggest to stick with the original suggestions for printing holders and inserts for the honeycomb wall: Use any material you like (I used red PETG), with layer height of 0.2mm, 4 perimeters and 20% infill. 

Tagi