Hours Till the New Year Counter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A counter that mimics the New Year Ball Drop in New York City. This can be used to count the hours until the ball drops.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 346
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Public Domain
Important:
All parts are sliced with G-code ready for PETG printing. The pin is an optional print and can be used in place of a M3 x 16 screw. Do note the fitment of this part will be tight and it may needed to be sanded as it was meant for the screw to thread into the back of the ball.
Hardware:
2 - support legs
1 - main body
1 - ball
1 - M3x16 screw or optional pin
1 - Washer (printed part)
(optional glue) - can be used on support legs or on optional pin
Assembly Instructions:
If using the screw:
- Place the washer on the screw
- Place the washer and screw through the back of the main plate.
- Screw on the ball.
- Attached the supports at the bottom of the main plate
If using optional pin:
- Place the washer on the small side of the pin.
- Place the pin through the back of the main plate.
- Glue on the ball.
- You may need to sand down the end of the pin as the ball is designed for the threads to cut as the screw is screwed in.
- Attached the supports at the bottom of the main plate.
Information on printing:
0.2 mm layer height is recommended
Support on the ball is recommended only on the build plate.
15% Infill is recommended but others may be used.