Painting Station
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Painting Station for my resin models
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 122
- Wydruki
- 0
- Wyświetlenia
- 862
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is something that was inspired by https://www.printables.com/model/632590-painting-station by Keno. I'm not sure if that makes this a remix or not but the work is original. I really liked it but couldn't print something sized for a Prusa XL This model was designed to take pretty much the full printable area on a Bambu X1C. I also wanted to see if I had learned enough fusion 360 to make a similar model. This model is 10 mm thick at the base and 80 mm and it's highest point. It's kind of a beast to print, at 20% infill it took nearly 500 g of PLA to print. The paint holders will hold 6 bottles of Standard size Vellejo Paint and 3 bottles of Primer or Wash.