1 / 6
Glasses and sunglasses holder for Ikea Skadis (No T-Clips) — zdjęcie 1
1 / 6

Glasses and sunglasses holder for Ikea Skadis (No T-Clips)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Glasses and sunglasses holder for Ikea Skadis pegboard with plugs for fastening.

Ocena
5 / 5
Polubienia
96
Pobrania
886
Wydruki
8
Wyświetlenia
3391
Oceny
7

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

A remix of @nslinger's remix of the (sun)glasses holder by @masimplo_77234 for the Ikea Skadis pegboard using plugs instead of t-clips.

I found the t-clips difficult to fit on my setup, so modified the model to add plugs to the back. Getting the plugs to print correctly required me to paint support enforcers on the bottom of the plugs (see picture). 

For best results, slowly and patiently wiggle the plugs through the skadis board and then slowly and patiently wiggle them down to lock them in place with friction.

Tagi