1 / 7
Xiaomi 20,000mAh Mi Powerbank 3 Pro TPU Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted a case for my power bank since it gets thrown around a lot so I came up with this sleek design.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 163
- Wydruki
- 1
- Wyświetlenia
- 902
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
As of this moment, because of the very snug design, the case I'm holding is pretty much permanent from my experience.
Printed flawlessly without any stringing with Bambu's TPU 95A HF in just 2h35min
- A version with a hole at the bottom, through which you can push the power bank out is also available if you plan on taking it out for any reason.
Here you can see a case I am working on, that will have the power bank embedded mid-print.