1 / 3
M2601 CR-10S Pro V2 / CR-10 Max [Micro Swiss Direct Drive Extruder] - Fan Shrouds — zdjęcie 1
1 / 3

M2601 CR-10S Pro V2 / CR-10 Max [Micro Swiss Direct Drive Extruder] - Fan Shrouds

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fan shrouds for installing the Micro Swiss M2601 kit onto the original CR-10S Pro V2 or CR-10 Max.

Ocena
5 / 5
Polubienia
21
Pobrania
379
Wydruki
2
Wyświetlenia
2311
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Fan shrouds installing the Micro Swiss M2601 Direct Drive Extruder onto a Creality CR-10S Pro V2 or Creality CR-10 Max.

The Direct Drive Extruder will work with both the shorter Ender-3 / CR-10 All Metal Hotend as well as the longer CR-10S Pro All Metal Hotend. Check the amount of cooling fins on your hotend and print the matching fan shroud.

Specific parts the fan shroud was designed for
Extruder: M2601 Micro Swiss Direct Drive Extruder for Creality CR-10 / Ender 3 Printers
Hotend Option 1: Micro Swiss M2583 CR-10 All Metal Hotend (4-finned cooling block)
Hotend Option 2: Micro Swiss M2591 CR-10S Pro All Metal Hotend (5-finned cooling block)
Part Cooling Fan: 4020 Blower
Hotend Fan: 4010
Probe: BL-Touch or CR-Touch

The PTFE Bracket will align the PTFE tube with the filament runout sensor, but you can also use the original Bowden extruder body as a bracket to hold the PTFE tube, instead of the 3D printed bracket.

Tagi