M2601 CR-10S Pro V2 / CR-10 Max [Micro Swiss Direct Drive Extruder] - Fan Shrouds
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fan shrouds for installing the Micro Swiss M2601 kit onto the original CR-10S Pro V2 or CR-10 Max.
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 380
- Makes
- 2
- Views
- 2,318
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Fan shrouds installing the Micro Swiss M2601 Direct Drive Extruder onto a Creality CR-10S Pro V2 or Creality CR-10 Max.
The Direct Drive Extruder will work with both the shorter Ender-3 / CR-10 All Metal Hotend as well as the longer CR-10S Pro All Metal Hotend. Check the amount of cooling fins on your hotend and print the matching fan shroud.
Specific parts the fan shroud was designed for
Extruder: M2601 Micro Swiss Direct Drive Extruder for Creality CR-10 / Ender 3 Printers
Hotend Option 1: Micro Swiss M2583 CR-10 All Metal Hotend (4-finned cooling block)
Hotend Option 2: Micro Swiss M2591 CR-10S Pro All Metal Hotend (5-finned cooling block)
Part Cooling Fan: 4020 Blower
Hotend Fan: 4010
Probe: BL-Touch or CR-Touch
The PTFE Bracket will align the PTFE tube with the filament runout sensor, but you can also use the original Bowden extruder body as a bracket to hold the PTFE tube, instead of the 3D printed bracket.