Simple pocket lamp holder for Original Prusa Enclosure - with charger!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
simple pocket light holder for the OPE, sized to hold an Olight Perun pocket light. customizable and with charger option
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 24
- Wydruki
- 1
- Wyświetlenia
- 242
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I made a simple pocket light holder for the OPE, sized to hold an O-light Perun pocket light (Perun's diameter is 23mm). Can be customized in OpenSCAD - I attached the .scad file.
There is a version available that allows you to use Olight's magnetic charger cable (Olight MCC-1A).
Print upright with enough perimeters so that the sleeve part has no infill. I printed 0.25mm layers with a 0.6mm nozzle in PLA. The version with charger base may need some (organic) support for the side opening.
You can thread the USB plug of the charger assembly through the holder (no need to cut the cable) and attach the MCC-1A magnetic base to the holder with a little bit of glue. The status indicator light of the charging base is conveniently visible from the side.
The pocket for the lamp is ~25mm (1 in) deep.
