ROTOPAX Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a few extra ROTOPAX mounts to mount cans in my shed when they weren't on vehicles.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 135
- Wydruki
- 0
- Wyświetlenia
- 810
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
RotoPax mount for their gas and fluid cans. Two models. One is designed to be attached to a surface using two #8 wood screws. The other uses two 5/16" bolts. Both use a 2" long 5/16" bolt in the handle with a captured nut. Print in PETG or ASA/ABS, as PLA will sag over time and droop in the heat. I used a generic PETG I had lying around and used the default 0.2 mm Strength setting but upped the infill to 35%. The handle is compatible with the factory mount.
This updated version replaces the one I did in TinkerCad with a more accurate model done in OnShape.
Print Settings
Printer Brand:
Bambu Labs
Printer:
P1S
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
35% or higher
Filament: PETG Black
Category: Automotive