ROTOPAX Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted a few extra ROTOPAX mounts to mount cans in my shed when they weren't on vehicles.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 135
- Makes
- 0
- Views
- 810
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
RotoPax mount for their gas and fluid cans. Two models. One is designed to be attached to a surface using two #8 wood screws. The other uses two 5/16" bolts. Both use a 2" long 5/16" bolt in the handle with a captured nut. Print in PETG or ASA/ABS, as PLA will sag over time and droop in the heat. I used a generic PETG I had lying around and used the default 0.2 mm Strength setting but upped the infill to 35%. The handle is compatible with the factory mount.
This updated version replaces the one I did in TinkerCad with a more accurate model done in OnShape.
Print Settings
Printer Brand:
Bambu Labs
Printer:
P1S
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
35% or higher
Filament: PETG Black
Category: Automotive