Safety Enclosure for AC-08 C14 Power Switch Module Plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover the open contacts on the rear of a C14 power socket plug. Mounting holes are present for Prusabox.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 399
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v3.0
This is an enclosure to house the IEC320 C14 power switch/inlet that's commonly found on Amazon and AliExpress. As designed, this plug connector has exposed terminals which present a shock hazard.
I found a need for this when I wanted to use this power switch with my Prusabox and didn't want the danger of getting shocked if I needed to reach into the back of the print enclosure. I'm still working on the wiring for my Prusabox, so I wanted a temporary solution.
This can be printed without supports.
Assembly is done with M3 bolts and heat set inserts. Four (4) heat set inserts are needed in total.
- 2 x M3x6mm screws are used to hold the power connector to the housing
- 2 x M3x8mm screws are used to secure the enclosure to the Prusabox
For the heat-set inserts, I recommend either the M3 short inserts by CNC Kitchen or Ruthex M3x5x4.