Safety Enclosure for AC-08 C14 Power Switch Module Plug
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cover the open contacts on the rear of a C14 power socket plug. Mounting holes are present for Prusabox.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 62
- Makes
- 0
- Views
- 401
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v3.0
This is an enclosure to house the IEC320 C14 power switch/inlet that's commonly found on Amazon and AliExpress. As designed, this plug connector has exposed terminals which present a shock hazard.
I found a need for this when I wanted to use this power switch with my Prusabox and didn't want the danger of getting shocked if I needed to reach into the back of the print enclosure. I'm still working on the wiring for my Prusabox, so I wanted a temporary solution.
This can be printed without supports.
Assembly is done with M3 bolts and heat set inserts. Four (4) heat set inserts are needed in total.
- 2 x M3x6mm screws are used to hold the power connector to the housing
- 2 x M3x8mm screws are used to secure the enclosure to the Prusabox
For the heat-set inserts, I recommend either the M3 short inserts by CNC Kitchen or Ruthex M3x5x4.