Taller 12mm Button Cap for Sim Racing Wheels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alternative, taller button cap for 12mm buttons.
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 160
- Wydruki
- 0
- Wyświetlenia
- 1667
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Many Sim Racing wheels designs (like those from Pokornyi Engineering) use the Omron button with a 12mm wide button cap.
Original sizing taken from the standard ones you can buy on Aliexpress, then modified to make it 1.5mm taller (STEP file included so you can change that if you like.
I print these on a Anycubic Photon M3, in SirayaTech FAST White resin, using their standard recommended settings. If you use this method, make sure to keep at least a 1mm wall thickness if you hollow the model to ensure the diffusion properties remain.
I've also printed these in PLA+ on a BambuLab P1P with their PLA in white for prototyping, but I prefer the finish in the resin.