1 / 1
Pipe Rack/Stand for 7 Pipes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rack designed to hold a '7 day set' Printed in parts. Due to tolerances you may need to file/sand parts for best fit.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 159
- Wydruki
- 1
- Wyświetlenia
- 907
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (39)Powiązane
I made this pipe to fit inside the lower cupboard of a mid-century smoking cabinet that I have. It works well with the pipes I have tested it with. I would be interested to hear how you find it.
N.B.
- I was able to print with a good brim and no supports. Depending on your own setup, you may need to adjust to suit.
- I intentionally design the fit of the parts to be tights, depending on your tolerances a little sanding or filing may be required for assembly.
I hope this helps. Please leave a like if it does, and post any makes or remixes.
All designs (however rubbish) are my own, and are made available for non-commercial use. Sale of design or prints is prohibited. You may find some of my other models interesting and/or useful too.