1 / 1
Pipe Rack/Stand for 7 Pipes
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A rack designed to hold a '7 day set' Printed in parts. Due to tolerances you may need to file/sand parts for best fit.
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 159
- Makes
- 1
- Views
- 907
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
I made this pipe to fit inside the lower cupboard of a mid-century smoking cabinet that I have. It works well with the pipes I have tested it with. I would be interested to hear how you find it.
N.B.
- I was able to print with a good brim and no supports. Depending on your own setup, you may need to adjust to suit.
- I intentionally design the fit of the parts to be tights, depending on your tolerances a little sanding or filing may be required for assembly.
I hope this helps. Please leave a like if it does, and post any makes or remixes.
All designs (however rubbish) are my own, and are made available for non-commercial use. Sale of design or prints is prohibited. You may find some of my other models interesting and/or useful too.