Silicone solid bed mounts mould
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Don't want to spend upwards of ten bucks for a little piece of silicone? FTIJPI Just mix up some high-temp silicone (I…
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 349
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Don't want to spend upwards of ten bucks for a little piece of silicone? FTIJPI
Just mix up some high-temp silicone (I used Lukopren 1522), pour it into bottom and base pieces, wait a few minutes for air to escape and then put a lid on it. For piece of mind you can wrap the base with a tape. Wait for the silicone to cure and demould (if it's stuck, just slide a needle around the sides of the cylinder to release it.
Included are files for 18mm and 16mm spacers.
For my Ender 3 I used one 16mm piece due to bed wirestrain, but you should be fine with making 4x18mm as well.
If you use it, I'd be happy if you post a comment.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
No
Supports:
No
.2
Infill:
doesn't really matter
Category: 3D Printer Parts