Silicone solid bed mounts mould
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Don't want to spend upwards of ten bucks for a little piece of silicone? FTIJPI Just mix up some high-temp silicone (I…
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 54
- Makes
- 1
- Views
- 349
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Don't want to spend upwards of ten bucks for a little piece of silicone? FTIJPI
Just mix up some high-temp silicone (I used Lukopren 1522), pour it into bottom and base pieces, wait a few minutes for air to escape and then put a lid on it. For piece of mind you can wrap the base with a tape. Wait for the silicone to cure and demould (if it's stuck, just slide a needle around the sides of the cylinder to release it.
Included are files for 18mm and 16mm spacers.
For my Ender 3 I used one 16mm piece due to bed wirestrain, but you should be fine with making 4x18mm as well.
If you use it, I'd be happy if you post a comment.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
No
Supports:
No
.2
Infill:
doesn't really matter
Category: 3D Printer Parts