No felt glides, rubber feet, different sizes!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Floor protectors for chair feet, sofas and furniture that slide too much. Made different sizes!
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 312
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here's my solution for furniture, sofas and chairs that slide too much and don't stay in place.
Floor protectors that won't slip!
Works like the felt glides you can buy nearly everywhere. Now fully printable.
Made different “No Glides" with and without hole in the middle to thighten or loosen the “Base”!
Assembly Notes:
Only press the “No Glides” into the Base and it stays in place. To fasten the “Base” use an M4 countersunk screw for wood or whatever you want.
You also can use an double-sided adhesive tape to fix the base on your furniture.
If you don't have flexible filament or you think it is to tricky, then use the “Base O-Ring” and insert the different o-rings.
Sizes:
- Ø15mm
- Ø20mm
- Ø25mm (Standard)
- Ø30mm
- Ø35mm
- Ø40mm
- Ø45mm
Feel free to contact me if you need a special size!
O-Ring Sizes
You can see the needed o-rings per “No glide” in the download section of the “Base O-Ring”
Inner Diameter x Cord diameter
- 5x4
- 10x4
- 15x4
- 20x4
- 25x4
- 30x4
- 34x4
- 40x4
Print Settings for the “Base”:
- I used PETG,PLA will work, too
- 0,15mm layer heigt
- 0,4mm nozzle
- no supports needed
Print Settings “No Glides”:
- I used Fiberlogy Fiberflex 40D, see here
- 0,2mm layer height
- 0,4mm nozzle
- no supports needed
- You can controll the stiffness with the infill. I used 50% Gyroid!
- to print the flexible filament, i used this setting, which worked very well for me! Many thanks to @Ethelder_114196! Only the extruder tensioning pulley needs to be loosened as far as possible!