Carbon Pellet Box and 6028 Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to circulate the air within a Voron v2.4.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 571
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Designed to fit a 60x60x28mm blower fan to circulate the air within your enclosed Voron v2.4 through carbon pellets***.
Consider ABS or ABS+, aligned for printing, recommend 40%+ infill, triangle pattern.
6028 blower fan used can be purchased on Aliexpress, https://www.aliexpress.us/item/3256804540555172.html
Assembly:
- Remove the top half of the 6028 blower fan, it should unclip
- Install 3 x M3 inserts on container, 2 x 3mm for the fan, 1 x 4-5mm for the lid
- Add up to 2.3 oz. (66 grams) of carbon pellets
- Secure the fan with 2 x M3 28-30mm bolt
- Secure the lid with an M3 6-8mm bolt
***This design is provided as is, without any guarantees or warranty. In association with the design, the designer makes no warranties of any kind, either express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, of title, or of non-infringement of third party rights. Use of the design by a user is at the user’s risk.