Lack Enclosure Wall Brace
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brace for stabilizing your lack enclosure to the wall to reduce vibrations.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 30
- Wydruki
- 1
- Wyświetlenia
- 310
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Brace for your lack enclosure that allows for variable depth. I designed it to use a mounting tape on the wall-side, feel free to remix it to allow it to be screwed into the wall. Use a total of 4 - one on each side of each tabletop right above where the legs screw in.
These braces, especially when combined with my other model, makes for a super solid printer with very little vibration. I was able to achieve over 10k acceleration on the X-axis of my modified Ender-3 with this combination!
Printed in PETG, with the brace on its side. I used supports, but with well-tuned bridge settings you can probably get by without them.