Lack Enclosure Wall Brace
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Brace for stabilizing your lack enclosure to the wall to reduce vibrations.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 30
- Makes
- 1
- Views
- 310
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Brace for your lack enclosure that allows for variable depth. I designed it to use a mounting tape on the wall-side, feel free to remix it to allow it to be screwed into the wall. Use a total of 4 - one on each side of each tabletop right above where the legs screw in.
These braces, especially when combined with my other model, makes for a super solid printer with very little vibration. I was able to achieve over 10k acceleration on the X-axis of my modified Ender-3 with this combination!
Printed in PETG, with the brace on its side. I used supports, but with well-tuned bridge settings you can probably get by without them.