1 / 4
Pixmax 720 / Jinko JR 720 vinyl cutter pen holder & spacer — zdjęcie 1
1 / 4

Pixmax 720 / Jinko JR 720 vinyl cutter pen holder & spacer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Pen holder & spacer for a Pixmax / Jinko JR vinyl cutter. Pen holder fits on leg, spacer for pen carriage.

Ocena
0 / 5
Polubienia
3
Pobrania
15
Wydruki
0
Wyświetlenia
196
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

We bought a vinyl cutter from Monster Shop for our hackspace which from their excellent manual seems to suggest it's a Jinko JR but rebadged as PixMax.  As such, the machine needed a few 3D printed bits to keep everything together.

Whilst the spare blades box can be stuck to the front with a double sided bit of sticky tape, there is no storage for the pen on the frame or the machine.  The main model for this holds either the pen or the blade holder whilst the other is in use.

Additionally it states that the blade needs to be clamped 2-3mm higher on the carriage rather than sitting on the ring of the blade or pen holder. Therefore included is a spacer which holds it about 2.5mm above the carriage.

Tagi