Pixmax 720 / Jinko JR 720 vinyl cutter pen holder & spacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pen holder & spacer for a Pixmax / Jinko JR vinyl cutter. Pen holder fits on leg, spacer for pen carriage.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 0
- Views
- 196
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
We bought a vinyl cutter from Monster Shop for our hackspace which from their excellent manual seems to suggest it's a Jinko JR but rebadged as PixMax. As such, the machine needed a few 3D printed bits to keep everything together.
Whilst the spare blades box can be stuck to the front with a double sided bit of sticky tape, there is no storage for the pen on the frame or the machine. The main model for this holds either the pen or the blade holder whilst the other is in use.
Additionally it states that the blade needs to be clamped 2-3mm higher on the carriage rather than sitting on the ring of the blade or pen holder. Therefore included is a spacer which holds it about 2.5mm above the carriage.
