Wallmount for Vision Encloser Door and Top
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Store your Vision enclosure parts securly
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 152
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you build the awesome Vision enclosure from @humebeam, you need sometimes to store the top and/or the front door for some prints. Now you can put them into this tiny wallmount to have them somewhere secure.
With this you can store your 3mm width panels,
For 4mm I added lower and mid parts.
I recommend print them with 4 walls and a 20% stable Infill like gyroid.
For the easy remove of the door I uses the half hinge and my pin for the hinge to remove it easyly.
To mount this, take one of mounts, and mount this one horizontally levelled. Put top and door in it, arrange it and mount the second one.
The hole is for 4mm or 4.5mm screws.
You need 4 6x3mm Magnets for top and sideholder.