Repair kit for Bosch Dryer handle plate for water container (9000024092)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
9000024092 can also be purchased for 50€, but why not printing the mechanism instead?
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 94
- Wydruki
- 1
- Wyświetlenia
- 1068
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
The plastic handle which holds the water-container broke and before buying a new 9000024092, I thought “why not repair it”? Printing the whole parts will not look so nice and it is quite material…
Result seems a bit over-engineered, but anyway, it works. You have to remove the damaged part with e.g. Dremel and the printed part is forced into the pockets. Works without glue or screws.
I highly recommend to print it upside (removing of supports is not so easy) as shown in the project. If you print it with less supports and laying down, the main forces are perpendicular to the layers. My second try upside worked…