akufu32 aka “Shinnosuke”: Original Mechanical Keyboard Case & Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This keyboard was designed for my small hands. The switch plate can be mounted with gaskets. Please provide 6 mm long…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 374
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This keyboard was designed for my small hands.
The switch plate can be mounted with gaskets.
Please provide 6 mm long M3 screws and insert nuts(length: 5mm). The screws should be low head screws.
The recess for the rubber feet is 7.9 mm in diameter.
To make a gasket mount, I stuck two EVA sheets with a thickness of 1.5mm to the screw holes on the switch plate.
For easier maintenance, I recommend attaching masking tape to the back of the Pro Micro to create tabs.
The holes in the switch plate are 14.2mm x 14.2mm to match the characteristics of my 3D printer. It may be too big or too small depending on the material of the filament and the characteristics of the printer.
If you need to make corrections, please edit the .f3z(Fusion 360 native) data.
Category: Computer