GlaDOS lamp silhouette 2.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a silhouette of GlaDOS from Portal that can fit in a lamp to create a cool shadow effect
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 17
- Wydruki
- 1
- Wyświetlenia
- 439
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the second version of my GlaDOS lamp-silhouette, a upgraded one of this: https://www.printables.com/de/model/702053-glados-lamp-silhouette
While the first one was just as large as my small printbed, this version is splitted in five parts.
The whole thing is about 44cm high! ...to fit exactely in my lamp :P
The model based on this Wallpaper: http://wallup.net/portal-portal-2-glados-chell-valve/
To print 1:1 you need a printbed that is at least 15x20cm, otherwise you have to scale the parts.
The object has a thinckness of just 0.4mm, thin enough to bend around the lamp, thick enough that no light shine through.
Just fix all the parts with transparent tape at the inside of your lamp.
The Lamp is an Ikea VIDJA lamp!