Filament spool holder for IKEA Eket cabinet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament spool holder for IKEA Eket cabinet consisting of aluminium tubing, some screws and printed parts.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 479
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I was tired of swapping my most used PLA spools on my mk4 spool holder. I have an IKEA Eket cabinet above the printer so there would be space for hanging the spools and could print directly from there.
But nothing simple was to be found on printables, so I designed my own model.
Even if this is for the Eket system, this could be adapted for Kallax, Bestå, Lack, Pax or other cabinets or shelve systems.
Material to source at your local hardware store:
- aluminium tube with outer diameter 23.5mm and length of roughly 300mm
e.g. https://www.bauhaus.info/metallprofile-kunststoffprofile/kantoflex-rundrohr/p/10521651 - 4 screws 3,5mm x 12mm (countersunk head)
e.g. https://www.bauhaus.info/holzschrauben-spanplattenschrauben/spax-universalschraube-t-star-plus/p/22545365
You may use tubing lesser then 23.5mm in diameter. Please scale the spacer in this case, so it snuggly fits on the tube.
Printed in/with:
- PETG
- 0.40mm nozzle
- 0.20mm layer height
- 15% gyroid infill
- 3 perimeters
- 5 top and bottom shells